Place of Origin:China
Max. Lifting Height:58.1
Max. Lifting Load:50t
Rated Lifting Moment:2009kN.m
Rated Loading Capacity:50t
Display online time:2019-11-04
After-sales Service Provided:Engineers available to service machinery overseas
Total vehicle mass in travel configuration:42200kg
Engine rated power:276/2200kw/(r/min)
Engine rated torque:1500/1300-1600N.m/(r/min)
Max. travel speed:85km/h
Min. turning diameter:24m
Min. ground clearance:327mm
Max. grade ability:0.42
Exterior noise level during acceleration traveling:≤88dB(A)
1.Leading lifting anddriving perrmances
Five section U-type booms. The boom length is 11.4m-43.5m with strong lifting performance, leading 5%-10% ahead of products with the same tonnages in the same industry.
High-power engine with good dynamic performance, strong gradeability and superior trafficability. The maximum gradeability and maximum travel speed respectively are 42% and 85km/h.
2.Reliability ofheat dissipation, electrical system etc. has been improved with safer operationand driving
Waterproof connector clip. It is equipped with rubber sheath inside with excellent water impervious and level of protection reaches to IP65.
Aluminium alloy fuel tank. Good appearance quality, corrosion resistance, strong shock resistance capacity.
Double- broken line winch. The hoisting rope is in alignment, and it will be more reliable if turn off the press-rope machine.
Optimized heat-removal system. The air-conditioning condenser is separately installed, the heat-sinking capability is sharply improved and the environment temperature reached to more than 45℃.
3.Mature and reliabledouble-pump confluence technique, aintaining the advantages of efficientoperation
Special confluence multi-valve has been designed. The double-pump confluence technique is adopted in raising and falling of winch, extending and retracting of lazy boom and luffing, leading ahead of luffing and extending and retracting operations.
4.Air-aid shift gears and 45% of shifting forceis reduced
Special air-aid shift gears protection mechanism. The boost system will work only by stepping on the clutch that effectively avoids gearbox damaging gears when shifting. Compared with the same industry, 100mm distance of shift gears and 45% of shifting force are respectively reduced.
5.Apearance molding isnewly upgraded, humanized design andcomfortable riding manipulation
New operating house, wheel house, engine hood and machine shed, novel appearances, fine lines of the complete machine appearance, shows its elegant appearance.
Ⅰ.Main Technical Data Table in Travel configuration
1st ,2nd axle
2nd ,3rd axle
3rd ,4th axle
Front overhang/rear overhang
Front extension/rear extension
2131/226 or 2144/226
Total vehicle mass in travel configuration
Engine rated power
Engine rated torque
Max. travel speed
Min. steady travel speed
Min. turning diameter
Min. ground clearance
Max. grade ability
Braking distance (at 30 km/h, full load )
Oil consumption per 100km
Exterior noise level during acceleration traveling
Noise level at seated position
Ⅱ.Main Technical Data Table for Lifting Operation
XCMG official manufacturer GR1603 motor grader
XCMG Official Manufacturer 12 m Scissor Lift GTJZ1212
XCMG Official Manufacturer 38m Telescopic Aerial Work Platform GTBZ38S
XCMG official manufacturer LW700KV Wheel Loader
XCMG official manufacturer LW900KN Wheel Loader
XCMG official CBD20FA Electric Forklift
XCMG official manufacturer XR180DII rotary drilling rig