At the beginning of the New Year, 20 XCMG XC958-EV pure electric loaders had a good start and were delivered to customers construction site in heavy snowfall at minus 20°C.

Since its launch, XCMG pure electric loaders have demonstrated excellent operating performance and energy-saving performance, and have been favored by customers in the steel, coal, port, logistics and other industries, and their market performance has been unparalleled.

Harsh challenges from -30°C to 40°C

The temperature in the delivery area fluctuates greatly throughout the year, from severe cold below -30°C to scorching heat above 40°C. The harsh natural environment poses a high challenge to the loader's environmental adaptability.

Therefore, the customer proposed at the beginning of the purchase that in order to achieve efficient transportation of local coal output, the first condition is to ensure full load operation 24 hours a day throughout the year.

To combat severe cold and heat, XCMG XC958-EV is equipped with a battery thermal management system intelligently controlled by BMS. It has stable performance, safety and reliability, and meets the characteristics of the local operating environment with extreme cold in winter, high temperature in summer, and large temperature difference between day and night. It is the "handlebar" for the charge. "Son" player. At the same time, with the LCD touch screen, the temperature of the battery, motor and controller can be monitored, and the device status can be controlled in real time.

Excellent quality withstands the test

At the delivery site, the coal logistics center was covered with heavy snow, and the soil was not hardened. Various high-intensity operations on this kind of road test the loader's heavy-load performance and walking ability.

XC958-EV adopts series dual-motor travel drive technology. Two motors drive the front and rear drive axles respectively. The two motors are connected through a transmission shaft. The power coupling transmission is matched with XCMG's self-made reinforced drive axle. The load-bearing capacity is increased by 10%, presenting a better performance. Strong heavy load performance and walking ability.

In terms of working equipment, XC958-EV uses a Z-shaped inverted six-link structure with a single rocker arm, short tie rod, and horizontal boom cylinder. It has small unloading impact, can provide superior operating performance, improve work efficiency, and fully support customer logistics. Efficient operation of the center.

High-end performance wins the market

The XC958-EV loader responds to the requirements of green environmental protection and replaces "oil" with "electricity". The traveling system and hydraulic system are controlled by motors. It is purely electric and has zero emissions. It saves maintenance costs such as air filters, machine filters, and oil filters. It can The consumption cost is only 1/4 of that of a diesel loader, making it economical and efficient.

The power is intelligent and powerful, and the operation is efficient and energy-saving. The walking system adopts the industry's original series-type dual-motor drive technology, which can perform intelligent coupling transmission, making it more intelligent and powerful. It is the industry's first gearbox-less solution, which reduces the fault feedback rate, eliminates gearbox maintenance and use costs, and saves worry and money. The whole machine is equipped with FNR handle function as standard, which can adjust the motor speed in real time according to the throttle opening, achieving stepless speed change and making the operation more efficient. By detecting braking or accelerator signals, the motor controller can enable the motor to reversely charge the battery during operation, making the operation more energy-saving.

The loader operation and hydraulic motor control are all driven by electricity, with a more scientific and reasonable design, comfortable operation, constant indoor temperature, and negative pressure sealing. The noise is less than 70 decibels and quieter. Energy consumption is reduced through motor power distribution technology, and the energy consumption of the whole machine per hour is The consumption is less than 40kw/h.

Dual-gun DC fast charging, super long battery life. The battery can be charged quickly to meet the needs of efficient construction, making the entire machine intelligent, efficient, green and safe to operate, energy-saving and environmentally friendly, green and pollution-free, and more economical and efficient.

Such high-end performance has won unanimous praise from customers - "New energy equipment is a powerful starting point to help the green transformation of the traditional energy industry. After in-depth research, XCMG has excellent technology, high level of intelligent manufacturing and excellent service guarantee, and is very reliable."Partner!"

XC958-EV winter maintenance guide

1. Antifreeze is added at -35°C. Do not mix antifreeze of different colors.

2. The temperature is low in winter. Please replace the corresponding oil in advance according to the temperature of the construction site and the technical specifications for oil use of loader products to ensure the normal operation of the whole machine.

3. Open the electric lock, wait for the instrument maintenance scan to show no faults, and then turn on the high voltage of the electric lock. If the instrument displays an abnormality or a fault code, please report it for repair in time and restart the operation after the fault is eliminated.

4. Before the whole machine is powered on with high voltage, put the manual gear handle in the "N" position, the FNR switch in the "N" position, and the pilot boom and bucket operating handles in the neutral position. Do not turn on the high voltage after the power is normal. Work directly.

5. Check the antifreeze in the motor water tank and battery water tank, and add it in time, otherwise it will easily cause the motor and battery to be overheated.

6. Check whether the gearbox oil level is at the normal position, otherwise it may easily cause damage to the gearbox.

7. If the electric loader has not been used for a long time, before resuming use, in order to activate the battery system, perform at least one "battery maintenance" to ensure that the battery performance is restored to its optimal state. If your electric loader will not be used for a long time, you need to perform "battery maintenance" every three months to prevent battery damage; the storage environment of the battery system should be kept ventilated and dry, away from heat sources, avoid exposure to the sun and rain, and maintain battery storage power. The optimal range is between 40% and 80%.