Dkx-b series of spiral swing cylinder
Specifications
- weight:30.000kg
Packaging & Shipping
- Delivery Lead Time:7 days for ready goods
- Minimum Order:1 Piece
- Supply Ability:10,000 Set/ Sets per Month
- Total Quantity In Stock:Over 5000
- Delivery Port:Any Port In China
The standard products of dkx-d series of spiral swing oil cylinder can bear bending moment, and can be installed by straddle or cantilever. Dkx-b series swing cylinder is widely used in swing of straight arm / curved arm and other aerial work platform.
Important product specifications
Standard working pressure: 21MPa
Standard swing angle: 180 degrees
Driving torque: 508n. M ~ 5870n. M
Holding torque: 1300n. M ~ 8040n. M
Straddle bending moment: 2500n. M ~ 18000n. M
Cantilever bending moment: 1356n. M ~ 6500n. M
Axial load: 500kg ~ 4000kg
Radial load: 1380kg ~ 4000kg
Torque output mode: flange
Installation method: foot or horseshoe
Special models (torque, installation form, size, etc.) can be produced according to customers' requirements
Characteristics and advantages
01 compact structure
A larger screw angle is used in the cylinder to shorten the piston stroke.
02 high bearing capacity
The special internal structure of the oil cylinder enables the oil cylinder to bear large axial and radial loads.
03 zero leakage
The unique seal design makes the oil cylinder only have a very small amount of leakage approaching zero.
04 load direct connection
The load to be driven can be directly connected to the torque output.
05 custom module
According to the different needs of customers, customized production.
